Rooftop EKDX Air Handling Units For Outdoor Installation

EK keeps looking for valuable distributors and partners around international markets…

When it is applied to EKDX Roof-top unit, the IDU can be equipped with rainproof shed, fresh air outlet rainproof cover, and insect-proof net, and can be directly placed outdoors without a dedicated equipment room.

EK's DX air handling unit is a medium-to-large scale air conditioning equipment that integrates air supply, cooling,heating, humidification, dehumidification, air purification and electric control. It is a direct evaporation-type unitwith multiple advantages such as simple system

composition, easy installation and low cost. It can be used in a wide range of clean technology field requiring of small high-clean spaces of tens to hundreds of square meters such as precision electronics,pharmaceuticals, bioengineering, medical and health, food, cosmetics and military industries.

EK's DX air handling unit is characterized by beautiful appearance, convenient layout, flexible use, high pressure resistance, high energy
efficiency, etc. It can provide professional automatic control schemes on request to achieve precise, economical and stable operation of
the unit. With complete models and flexible combinations, the unit can adapt to a wide temperature range of -30°C to 48°C outdoors, thus
fully meeting the different needs of various regions and industries.

■ The unit has a simple design and easy control, and is suitable for independent use.

■ The indoor unit can be directly mounted to the ceiling or in an attached room, not requiring a special air-conditioner room.

■ No chilled or cooling water system is required. The control is simple. The project can be completed phase by phase at a low construction cost.

■ The maintenance is simple. Maintenance of a single unit requires only the space of the clean room.

■ The unit can run at temperature ranging from -10°C to 48°C.

Specifications

Characteristics of IDU

EK patented cold bridge-free cabinet structure

With the latest European design of cold bridge-free line contact inner frame structure for the EK combined cabinet, the unit has no cold
leakage parts and adopts marine-grade standard sharp line contact seal to connect the built-in frame with the overall foam tightly, forming a
high-strength and perfect frame structure. The thermal insulation performance reaches the European standard T2 level, which can completely eliminate the cold bridge loss of cooling capacity.

High-quality filter

The unit adopts pleated primary effect filter and multi-bag medium effect filter to increase the area of filter material and effectively retain dust. For units used in purification occasions, the filter adopts a purification-grade installation frame. The circlip fixing method allows it easy to

disassemble and install, and the windward compression design can achieve purification-level sealing effect. It can be equipped with glass

fiber type high-efficiency filter to filter ultra-fine dust to meet the filtration efficiency requirements of clean room. Filters of activated carbon,

electrostatic type, and photocatalytic type can also be equipped according to customer needs.

High-strength high-insulation panel

The unit adopts sandwich environmentally friendly high-pressure and constant-temperature fluorinated polyurethane-free foam, with a foaming density of at least 48 kg/m3 and a thermal conductivity of only 0.0188 W/m*C.

With built-in angle steel frame and aluminum alloy frame, it features strong non-deformability and beautiful appearance. The joint adopts

a unique clamp design to not only provide convenience for disassembly and maintenance, but also ensure a low air leakage rate; when the negative pressure inside the unit is 700 Pa, the air leakage rate is only 0.04%, which fully meets the needs for use in various purification

places.