Send Message
Home ProductsAir Handling Units

Clean Room Double Skin DX Air Handling Units 30/50 mm PU Insulation

Clean Room Double Skin DX Air Handling Units 30/50 mm PU Insulation

  • Clean Room Double Skin DX Air Handling Units 30/50 mm PU Insulation
Clean Room Double Skin DX Air Handling Units 30/50 mm PU Insulation
Product Details:
Place of Origin: China
Brand Name: EuroKlimat
Certification: ISO9001, ISO14001, OHSAS18001, CRAA, CQC
Model Number: EKDX
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: negotiation
Packaging Details: Plywood
Delivery Time: 15 working days after received your payment
Payment Terms: L/C, T/T
Supply Ability: 5,000pcs per month
Contact Now
Detailed Product Description
Product Name: DX Air Handling Unit Installation: Ceiling/floor Installation
Cooling Capacity(kW): 25-300 Heating Capacity(kW): 28-330
Air Flow(m3/h): 5000-60000 Aluminum Fins: Shutter-type Hyperbolic And Hydrophilic Fins
Test Pressure (Mpa): 3.3 Coils Rows: 4/6
High Light:

hvac air handling unit


chilled water air handling unit

EK keeps looking for valuable distributors and partners around international markets…


Clean Room double skin DX Air Handling Unit 30/50 mm PU insulation



Features of EK clean-room air handling unit EK clean-room air handling unit is specifically designed for clean rooms. It provides a built-in cooling and heating source, integrates air handling and automatic control functions, and has the following features: low investment, simple system, efficient running, and easy installation and maintenance.


■ The unit has a simple design and easy control, and is suitable for independent use.


■ The indoor unit can be directly mounted to the ceiling or in an attached room, not requiring a special air-conditioner room.


■ No chilled or cooling water system is required. The control is simple. The project can be completed phase by phase at a low construction cost.


■ The maintenance is simple. Maintenance of a single unit requires only the space of the clean room.


■ The unit can run at temperature ranging from -10°C to 48°C.



Model Indoor unit EKDX050-25A/ EKDX050-25AR EKDX075-37.5A/ EKDX075-37.5AR EKDX100-25A/ EKDX100-25AR





EKDX125-31A/ EKDX125-31AR EKDX125-62.5A/ EKDX125-62.5AR








Nominal cooling capacity (1) kW 25 37.5 25 50 31 62.5
Nominal heating capacity (1) kW 28 41.3 28 55 34.1 68
Nominal cooling capacity (2) kW -- 32.5 21 44 29 58
Nominal heating capacity (2) kW -- 36 24 49 32 63
Air flow m3/h 5000 7500 10000 10000 12500 12500
EKDM air handling unit model corresponding to the external height and width   EKDM0507H EKDM0510H EKDM0611H EKDM0611H EKDM0810H EKDM0810H
Refrigerant model   R22
Outer dimensions of indoor unit Length mm As per the number of function sections
Height mm 850 850 1010 1010 1330 1330
Width mm 1170 1650 1810 1810 1650 1650
Outer dimensions of outdoor unit
(W × D × H)













Compressor of outdoor unit Model Fully hermetic volute
Outdoor unit weight kg 265 / 280 285 / 300 265 / 280 2x265 / 2x280 270 / 285 2x270 / 2x285
Power supply of outdoor unit   380V/3N~/50HZ
Cooling input power of outdoor unit kW 9.33 / 9.4 16.13 / 17.47 9.33 / 9.4 20.41 / 20.17 12.1 / 12.25 24.2 / 24.5
Heating input power of outdoor unit kW -- / 9.75 -- / 14.7 -- / 9.75 -- / 20.3 -- / 10 -- / 20
Connecting pipe
Liquid pipe



15.88(5/8) 15.88(5/8) 15.88(5/8) 15.88(5/8) 15.88(5/8) 15.88(5/8)
Gas pipe φmm(in.) 28.6(1-1/8) 34.9(1-3/8) 28.6(1-1/8) 28.6(1-1/8) 28.6(1-1/8) 28.6(1-1/8)
Connect mode   Soldering


■ The nominal cooling capacity (1) is measured under the following conditions: The indoor dry/wet bulb reads 27/19 °C and the outdoor dry/ wet bulb reads 35/24 °C. The nominal heating capacity (1) is measured under the following conditions: The indoor dry bulb reads 20 °C and the outdoor dry/wet bulb reads 7/6 °C.


■ The nominal cooling capacity (2) is measured under the following conditions: The indoor dry/wet bulb reads 24/17 °C and the outdoor dry/wet bulb reads 35/24 °C. The nominal heating capacity (2) is measured under the following conditions: The indoor dry bulb reads 24 °C and the outdoor dry/wet bulb reads 7/6 °C.


■ The nominal cooling capacity does not consider heat losses of the fan motor of the indoor unit. The external static pressure can be customized, in which case the power of the air supply motor changes accordingly.


■ The specifications are subject to change due to product improvements without prior notice.


■ The fresh air flow of the unit cannot be larger than 20%.

Consolidated Structure


The unit features a compact structure, easy assembly, and solid seal. It adopts special seal glue handling, providing air leakage rate as low as 0.3%. The 30mm (standard)/50mm (optional) enhanced high-pressure non-fluorine polyurethane double-layer foamed panel delivers a solid insulation performance and high bearing capacity, meeting requirements of a purifying unit for high residual pressure.


High Efficient and Low Noise


The outdoor unit adopts brand-name fully hermetic volute compressors that deliver high efficiency, low noise, and strong resistance to hydraulic shock and run at temperature ranging from -10°C to 48°C, meeting cleaning requirements in various regions and scenarios.


The indoor unit adopts imported high-quality centrifugal fans with double air intakes (model selection of the fans has passed AMCA certification) or unhoused fans (optional), and is equipped with dedicated anti-vibration measures for quiet running.


Load Matching


The evaporation section of the indoor unit can be equipped with a bypass valve. The direct evaporation coil supports combination with multiple cooling capacity options according to different conditions for a wide range of fresh air/air return scenarios. The outdoor unit of a large-capacity cooling unit adopts modular design, allowing differential energy regulation during use, lowering the operating cost, and reducing shock on the grid at startup.




The indoor unit adopts a dry water drainage tray that has no residual condensed water and prevents bacteria. A stainless steel water tray is optional. In addition, a sterilization device such as efficient UV sterilization lamp and ozone generator can be configured as required to eliminate bacteria and effectively
suppress microbes in the system.


Saving Investment


The unit has a built-in cooling and heating source and does not require a chilled or cooling water system, greatly saving user investment, and making the unit structure simple and compact. No dedicated equipment room is required. The unit can run immediately after cabling and piping. The installation, use, and maintenance are easy.


Smart Control


The unit adopts integrated digital electromechanical design and is equipped with a smart controller, providing multiple control functions such as constant temperature, constant humidity, function setting, fault alarm, and remote monitoring to ensure safe and reliable unit running.


Prevention of Cold Bridge


The unit adopts inner skeleton design and high-strength foam seals and tight repair door structure, effectively preventing cold bridge between wall plates, between wall plate and inner skeleton,
or at the repair door. The panel of the unit is wrapped with solid insulating UPVC plastic at all sides, avoiding direct contact with thermal conductive parts, providing T1 class insulation performance, eliminating cold bridge, and preventing cooling loss.


High-Quality Filters


The unit adopts a high-quality multi-level (primary, medium, sub-high, and high efficiency) air filtering system. The filtering class meets the requirements of a special clean room, and can effectively suppress organic compounds on the filtering paper.


Purification Design


A special frame structure ensures smooth surface in the unit. The inner stainless steel surface and an efficient heat exchanger (optional) made of hydrophilic aluminum foil can effectively prevent dust accumulation and re-entrainment. The special design and materials can resist disinfectant and air erosion and are favorable for regular cleaning and sterilization.


Multi-System Design


The outdoor unit adopts modular design and starts level by level, efficiently reducing shock on the grid. Multiple levels of cooling are provided, allowing differential energy regulation under different load conditions and reducing the operating cost. The compressors wear in a balanced manner, prolonging the lifecycle.

Contact Details
Guangdong EuroKlimat Air-Conditioning & Refrigeration Co., Ltd

Contact Person: Mr. LENG Zhengliang

Tel: +86 13828797702

Fax: 86-0769-83622528

Send your inquiry directly to us (0 / 3000)

Other Products